home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software Vault: The Gold Collection
/
Software Vault - The Gold Collection (American Databankers) (1993).ISO
/
cdr11
/
pdox693.zip
/
TI376.ASC
< prev
next >
Wrap
Text File
|
1992-09-09
|
2KB
|
133 lines
PRODUCT : Paradox NUMBER : 376
VERSION : 3.0
OS : DOS
DATE : September 9, 1992 PAGE : 1/2
TITLE : Installing Paradox 3.0 With DOS 4.01
There is a known installation problem with Paradox 3.0 and MS-DOS
Version 4.01. It is possible to encounter an error when
installing Paradox with the System 1 diskette. The following
workaround will enable you to install Paradox 3.0. The reason
for the workaround is due to the fact that MS-DOS version 4.01
was released after Paradox 3.0 was released.
1. Rename your Autoexec.bat file. This is done as follows:
a. At your DOS prompt, type CD C:\
Then press <Enter>
b. Type REN Autoexec.bat Autoexe1.bat
Then press <Enter>
2. Rename your Config.sys file. This is done as follows:
a. Type REN Config.sys Config1.sys
Then press <Enter>
3. Press <Ctrl><Alt><Del> to reboot your PC.
4. When your DOS prompt appears, install Paradox 3.0.
5. When Paradox 3.0 is successfully installed, rename your
Autoexe1.bat file to Autoexec.bat. This is done as
follows:
a. At your DOS prompt, type CD C:\
Then press <Enter>
b. Type REN Autoexe1.bat Autoexec.bat
Then press <Enter>
6. Rename your Config1.sys file. This is done as follows:
a. Type REN Config1.sys Config.sys
Then press <Enter>.
PRODUCT : Paradox NUMBER : 376
VERSION : 3.0
OS : DOS
DATE : September 9, 1992 PAGE : 2/2
TITLE : Installing Paradox 3.0 With DOS 4.01
7. Press <Ctrl><Alt><Del> to reboot your PC.
8. You are now ready to use Paradox 3.0.
DISCLAIMER: You have the right to use this technical information
subject to the terms of the No-Nonsense License Statement that
you received with the Borland product to which this information
pertains.